VCAP-DCA Exam Experience



I recently passed the VMware VCAP-DCA exam for vSphere 5.5, and as others have done, wanted to share a few of my thoughts on the exam. The absolute biggest challenge is time. At only 180 minutes long and 23 questions, you would think there would be ample time to get through every question with room to spare. Not the case for me. The first time I looked up, 60 minutes was gone, then before I knew it there was only 20 minutes left. The challenge is knowing how long to spend on any given question, since each one differs so much one from the next.

As far as studying goes, the best advice I can give you is to just practice vSphere troubleshooting and setup tasks as often as possible in a real environment or lab if you don’t have regular access to a production vSphere environment. I did take the VMware vSphere: Troubleshooting Workshop [V5.5] class back in December. It was helpful, but mostly just as a primer to the sort of questions you might be asked on the exam. The best thing to do, which I started doing back in January, was performing every task I could do using esxcli, PowerCLI and the vSphere Web Client. Using my Intel NUC lab, I went through setting up the entire environment from scratch several times — creating iSCSI mounts entirely using esxcli, creating distributed virtual switches, DRS/HA clusters, etc.

There are several study guides out on the Internet as well that are good for brushing up on the blueprint items you may be unfamiliar with. Download the ones you think will help you and go through them as much as possible. Overall, I would just say that if you are already a vSphere Administrator in your current role, the test itself will not prove too large of a hurdle. Just breathe deep and work through each question.

The questions themselves covered a broad depth of topics, but none of the questions were as arcane or obscure as a few VCP questions I got taking that test (i.e. storage encryption switch for Fiber Channel storage arrays and its effect on VMFS datastores). There were some questions you had to use esxcli to successfully complete, some that could be done either through the web client or the old thick client and a couple that you had to use the web client to answer.

I was not able to finish all of the questions in the time allowed and when I left the exam facility, I did not think I had passed. I was pleasantly surprised when the results arrived and I scored in the mid-300s — enough to pass. The VCAP-DCD exam is up in the next month in preparation for the VCDX defenses in the beginning of 2016.

If you decide to take the exam, good luck. It was a great feeling with the email saying I had passed the test!

VMworld 2015 Tuesday Recap

VMworld 2015

Another great day at VMworld 2015 is in the books. For the first time, I have been able to get a behind-the-scenes look at what it takes to run the Hands-on-Lab (HoL) area for the VMworld conference. I spent most of the morning in the NOC area with colleagues monitoring the systems providing the HoL capacity. In a very good way, it was pretty boring. All of the months of hard work leading up to the conference has resulted in a pretty smooth user-experience — not withstanding the WiFi issues which are handled entirely by a 3rd party.

The afternoon saw me do something I had tentatively planned for the past several months — sitting for my VCAP5-DCA exam. Although I did not study to the level originally planned, I decided to take the test while at the conference both due to peer pressure and the convenience offered by doing it here. I had a positive overall experience taking the exam. The questions themselves were not as difficult or obscure as I was worried they would be. Having spent a significant amount of time administrating large-scale VMware private clouds over the past few years greatly helped with my confidence level during the exam itself. The one bit that is always hard is having to know and understand VMware technologies you may not have utilized in your career for whatever reasons. In my case, that mostly revolves around vSphere Replication and VUM — seriously who uses VUM anymore?

All that being said, the most difficult part of the exam is time management. The exam is only 180 minutes + 15 minutes for the survey. It is difficult to know if you are spending too much time on a single question when their difficulty and number of required steps vary so much one from the next. I tried to go through the questions in order, without skipping ahead to find the ‘easy’ questions — mostly because so many of them are based off of previous tasks you likely had to perform. I will say one thing, the lab environment experience was not as bad as I had read others having had.

Here are a few things I would have done differently had I known beforehand:

  1. After starting the exam, immediately log into the vCenter C# and Web Client — login takes several minutes and this will save you time later.
  2. Start the vMA appliance right away. Although I only had one question where the vMA appliance was required, you don’t want to be waiting for it half-way through the exam when you are starting to feel the time crunch.
  3. Start SSH on the ESXi hosts if that is your preferred method for using esxcli.
  4. Monitor how much you drink in the hours before the exam — that or get a catheter. If you have to use the restroom midway through, they will let you, but your time continues to tick away while you are gone.

I am looking forward to Wednesday at the conference. It will be my last day here, but if you see me walking around and want a Virtual Elephant laptop sticker poke me. I’ll be in the Solutions Exchange after the vBloggers session today.